Advertisement
A
B
C
D
Fault
No water being conveyed
Reduced amount of water
being conveyed
If any other faults arise, please contact GARDENA Service.
7. Storing your Fountain Pump Set
Overwintering :
Disposal :
(in accordance with
RL 2002 / 96 / EC)
8. Accessories
GARDENA pond filter
GARDENA
Pond Construction Products
GARDENA Hoses
2. FSP 5500 DUO / FSP 8000 DUO / FSP 15000 DUO : Turn
pump housing
A
housing
.
FSP 2000 / FSP 3000 : Release the catches
pump housing
3. Clean the motor housing
4. FSP 2000 / FSP 3000 : Pull the impeller unit
A
housing
0
During assembly, ensure that the seal / foam filter
seated in the motor housing
5. FSP 5500 DUO / FSP 8000 DUO / FSP 15000 DUO : Press
pump housing
clockwise.
FP 2000 / FP 3000 : Press pump housing
A
housing
.
Possible Cause
Mains plug not plugged in.
Impeller unit blocked.
Thermal overload switch has
been activated
(pump has run dry).
Filter housing is dirty.
The pump should be stored out of the reach of children.
1. Remove the pump from the pond before frost is expected and
clean.
2. To avoid difficulties when starting up in the spring, we
recommend storing the pump in a frost-free location in
a container filled with water.
The mains plug must not be submerged.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
Cleaning garden ponds with and without fish.
For designing and creating your own water feature.
(e.g. a stream).
For connection between pump and filter.
0
anti-clockwise and pull vertically off the motor
0
off the motor housing
A
and pump housing
clean and push back into the motor housing
A
.
0
vertically onto the motor housing
Remedy
V Plug in mains plug.
V Clean pump.
1. Unplug the mains plug and
2. Plug the mains plug back in
V Clean filter housing.
C
and pull the
A
.
0
.
D
out of the motor
A
B
is correctly
A
. and turn
0
onto the motor
allow the pump to cool.
after approx. 2 minutes.
.
11
Advertisement
