Encoder Programming And Setup Via Gui Interface; Overview Page Of Fenger Encoder - Fenger FDM-4000i Installation & Configuration Manual

Encoder Programming and Setup via GUI Interface:

:
Step 1 After setting the static IP address in the web address field, press Enter and you will
view the Device Webpage.

Overview Page of Fenger Encoder

Welcome page showing overview status of the Encoder when fully functioning.
Step 2: Login Select Common Setup
Once the Common Setup Tab is selected you will be prompted to enter the user name and
password for device.
Default User Name: admin
Default Password: Admin123
Note: To change the Password for the GUI go to the Administration Tab
- 9 -
FDM-4000i Manual V1.0