Table of Contents
Advertisement
Step 9: IP Streaming
IP Streaming Setup
Select the Streaming 1, 2, 3, 4 tab to program an individual IP Streaming.
Use the IP Streaming setup page to set your device's IP streaming IP Address, and select your
streaming method protocol and Destination IP, Port, and TTL settings.
Step 10: Local Save
Once all parameters are set you are required to do a Local Save.
***** Ensure all Encoder changes have been locally saved before performing Step 11.
Step 11: Upload and Reboot
Once you have set all the encoder settings and performed a Local Save for each Setup tab.
Select "Upload and Reboot" on the IP Streaming page after you have saved all your Local
changes. This function will upload and save all parameters set in the Common, RF, Encoder,
IP Streaming sections of the device. Your device will quickly reboot.
Reminder: If changing only a setting on a specific setup page- remember to do a "Local Save"
and "Upload and Reboot".
We highly recommend you to save your encoder configuration files. See Administration tab for
how to back up your settings.
- 13 -
FDM-4000i Manual V1.0
Advertisement
Table of Contents
