Figure A.1: Avriq Status Dialog Box - Avocent AutoView 1400 Installer/User Manual

44 AutoView 1400/1500/2000 Installer/User Guide
• Verify that a null modem serial cable is used.
• In the selected COM port Advanced Port settings, verify that the FIFO buffers are selected and
that the receive buffer is set to High.
CAUTION: While upgrading, do not use your computer for anything else or switch between windows. Close all
other windows if necessary. If the upgrade was unsuccessful (such as during a power outage), repeat
the procedure.
Upgrading the AVRIQ module firmware
The AVRIQ modules can be upgraded individually or simultaneously.
NOTE: IAC modules are not upgradable.
To simultaneously upgrade multiple AVRIQ modules:
1. Press
Print Screen
2. Click Commands - AVRIQ Status. The AVRIQ Status dialog box displays.

Figure A.1: AVRIQ Status Dialog Box

3. Click one or more types of modules to upgrade. Click Upgrade.
4. The AVRIQ Upgrade dialog box displays. Click OK to initiate the upgrade and return to the
AVRIQ Status dialog box.
. The Main dialog box will appear.