Scanning Your System; Figure 3.14: Target Selection Dialog Box; Figure 3.15: Target Version Dialog Box - Avocent AutoView 1400 Installer/User Manual

Figure 3.14: Target Selection Dialog Box

4. Select an AVRIQ or IAC module to view and click the Version button. The Target Version
dialog box displays. For more information on loading firmware, see Appendix A.

Figure 3.15: Target Version Dialog Box

5. Click X to close the Target Version dialog box.
NOTE: The Load Firmware button will only display for an AVRIQ module; IAC modules are not upgradable.
Only the administrator and the user (when local user accounts are disabled) can upgrade the firmware on an
AVRIQ module.

Scanning Your System

In Scan Mode, the appliance automatically scans from port to port (server to server). You can scan
up to 16 servers, specifying which servers to scan and the number of seconds that each server will
display. The scanning order is determined by placement of the server in the list. The list is always
shown in scanning order. You can, however, choose to display the server's name or EID number by
pressing the appropriate button.
Chapter 3: Basic Operations 31