Avocent AutoView 1000R Installer/User Manual page 69

These key combinations will work with the USB AVRIQ module (if your Sun
system comes with a USB port) as well as the Sun AVRIQ module. With the
exception of F12, these key combinations are not recognized by Microsoft
Windows. Using F12 performs a Windows key press.
When finished, press and hold Ctrl+Shift+Alt and then press the Scroll Lock
key to toggle Advanced Sun Key Emulation mode off.
Special considerations for Japanese and Korean Sun
USB keyboards (AVRIQ-USB modules only)
Japanese Sun USB and Korean Sun USB keyboards assign usage IDs for certain
keys that differ from standard USB usage IDs. If AVRIQ-USB modules are
attached to your Sun servers, the Han/Zen and Katakana/Hiragana keys on
Japanese Sun USB keyboards and Hangul and Hanja keys on Korean Sun USB
keyboards must be accessed using alternate keystrokes.
Due to these keyboard-specific differences, keyboard mapping inconsistencies
may be encountered when switching between servers using Sun AVRIQ
modules and servers using AVRIQ-USB modules. These keys function
normally if your Sun servers are attached to the AutoView 1000R/2000R
appliance using a Sun AVRIQ.
The following table lists the keyboard mapping that will take place when an
AVRIQ-USB is used in this setting.
PS/2-to-USB Keyboard Mappings
PS/2 USB
Keyboard Usage ID
Right-Alt ØxE6
Windows Øx65
Application
Hangul Øx90
Hanja Øx91
Katakana/Hiragana Øx88
Han/Zen Øx35
Sun US Korean Sun
Keyboard USB Keyboard
AltGraph Hangul
Compose Hanja
N/A N/A
N/A N/A
N/A N/A
` ~ ` ~
63
Appendices
Japanese Sun
USB Keyboard
Katakana/Hiragana
Compose
N/A
N/A
Han/Zen
N/A