Avocent AutoView 1000R Installer/User Manual page 58

52
AutoView 1000R/ AutoView 2000R Installer/User Guide
3. Click AVRIQ to view individual module version information. The AVRIQ
Selection dialog box appears.
Figure A.4: AVRIQ Selection Dialog Box
4. Select an AVRIQ to upgrade and click the Version button. The AVRIQ
Version dialog box appears.
Figure A.5: AVRIQ Version Dialog Box
5. Click the Load Firmware button. The AVRIQ Load dialog box appears.
Figure A.6: AVRIQ Load Dialog Box
6. Click OK to initiate the upgrade and return to the AVRIQ Status dialog box.
NOTE: During an upgrade, the AVRIQ status indicator in the Main dialog box will be yellow.
The selected AVRIQ module is unavailable while an upgrade is in progress. When an upgrade
is initiated, any current connection to the server via an AVRIQ or serial device via an AVRIQ-
SRL will be terminated.