Avocent AutoView 1000R Installer/User Manual page 37

To remove a server from the scan list:
1. In the Scan dialog box, deselect the checkbox next to the server to
be removed.
-or-
Double-click on the server's name or port.
-or-
Click the Clear button to remove all servers from the scan list.
2. Click OK.
To start the scan mode:
1. If OSCAR is not open, press Print Screen. The Main dialog box will appear.
2. Click Commands. The Commands dialog box appears.
Figure 3.12: Commands Dialog Box
3. Select Scan Enable in the Commands dialog box.
4. Click X to close the Commands dialog box.
NOTE: Scanning will begin as soon as the scan button is checked.
To cancel scan mode:
1. Select a server if OSCAR is open.
-or-
Move the mouse or press any key on the keyboard if OSCAR is not open.
Scanning will stop at the currently selected server.
-or-
If OSCAR is not open, press Print Screen. The Main dialog box will appear.
2. Click Commands. The Commands dialog box appears.
3. Clear Scan Enable.
Chapter 3: Local Port Operation
31