Wep: Setting The Network Key (Network Security); Figure 10: Manually Adding A Wireless Network - 3Com WL-549 User Manual

3.3.1 WEP: Setting the Network Key (Network Security)

This section gives instruction on how to correctly set up WEP security on your HP PC. If you
are currently running a WPA/WPA2 enabled device, skip to Section 3.3.2, WPA/WPA2:
Setting the Network Key (Network Security).
In order to set up your Network Key (WEP security feature) you will need to do the
following:
1. Open the Wireless Network Connection Properties dialog box:
• Right click on the Wireless Networks icon in the system tray.
Select View Available Wireless Networks from the Wireless Networks I
•
con menu.
The Wireless Network Connection dialog box appears.
Select Change advanced settings on the left side of the dialog box.
•
The Wireless Network Connection Properties dialog box appears.
• Select the Wireless Networks tab as shown in figure 10 below.

Figure 10: Manually adding a Wireless Network

2. Select Add under the Preferred networks selection box.
The Wireless Network Properties dialog box appears.
3Com Wireless 11g PCI Adapter
14