The Wireless Network Connection dialog box will appear as shown below.
Figure 4: Wireless Network Connection dialog box
5. Enter your Network Key (WEP Key or WPA/WPA2 Key) for your Wireless Network.
6. Input the Network Key a second time into the "Confirm network key" box.
Note:
If your network is using WEP encryption, then a HEX or an ASCII format is
necessary when entering your Network Key:
o HEX: 10 Characters in HEX notation for 40 bit or 26 characters for 128 bit
encryption.
o ASCII: 5 characters for 40 bit or 13 characters for 128 bit encryption.
If your network is using WPA/WPA2 it is necessary to enter an 8 – 63 character
alphanumeric key-phrase.
The Network Key will accept any of these as it supports both WEP and
WPA/WPA2.
7. Select Connect.
The Wireless Network Connection dialog box appears as you are being connected.
Figure 5: Connecting to Wireless
3Com Wireless 11g PCI Adapter
10