Monitoring The Logged In Users - Net Insight Nimbra One User Manual

Monitoring the logged in users

46 • Status Monitoring
©2006 Net Insight AB, All rights reserved
Figure 42. The Inventory page, second part
For Boards-position on which more than two FW-images could be stored, i.e.
Control Module, Gigabit/Fast Ethernet, STM-1 access, for those boards the
image that is running will be indicated as follows:
Primary: Image stored as primary
Secondary: Image stored as secondary
Running: Image that is running could be either the primary or secondary
For boards on which only one FW-image could be stored, only the primary
image will be presented and that one is thus the same as the running.
This function is used to check if any other users are logged in to the unit over
web GUI (Graphical User Interface), to make sure that no other user attempt to
configure the unit at the same time.
1. Click on the Status|Who. The Who page, Figure 43, will appear.
Figure 43. The who page
The table shows information about other logged in users, as follows:
•
User name lists all the logged in users in the unit.
•
Tty shows the type of terminal used.
•
From shows the IP address of the logged in users.
•
Login shows the time when the user logged in.
•
Expire shows the time when the user' s session will expire.
Element Manager User's Manual Nimbra OneSerie