Events - Net Insight Nimbra One User Manual

Element manager
Table of Contents

Advertisement

Events

40 • Status Monitoring
©2006 Net Insight AB, All rights reserved
3.
The Alarms page, Figure 34, appears with Ackn. set to "yes" and the
alarm is no longer shown in the Alarm monitor.
Note:
In some circumstances the cause of the alarm can not be
remedied or the alarm should not be acknowledged until later.
In this case, use the Comments field to pass on any comment
regarding the alarm event.
Note! The event list will present the events which are defined under
Maintenance|Preferences.
1.
Click on the Status menu item and then click on Events. The Events
page, Figure 36, will appear.
Figure 36. Events page
The table shows the last events logged by the unit, such as configuration
changes, alarms and other system related events, as follows:
Index number of the event.
Id:
Indication of the severity of the event. The following
Sev:
values are possible:
Cr
indicates that a service affecting condition has occurred
and an immediate corrective action is required.
Ma
indicates that a service affecting condition has
developed and an urgent corrective action is required.
Mi
indicates the existence of a non-service affecting fault
condition and that corrective action should be taken in
order to prevent a more serious fault.
Wa
indicates the detection of a potential or impending
Critical (red). The critical severity level
Major (orange). The major severity level
Minor (yellow). The Minor severity level
Warning (blue). The warning severity level
Element Manager User's Manual Nimbra OneSerie

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nimbra 300 seriesNimbra one 600 series

Table of Contents