Koolaire KDT0300A Technician's Handbook page 39

Mix a solution of sanitizer and warm water.
Step 9
Solution Type
Sanitizer
Use half of the sanitizer/water solution to
Step 10
sanitize all removed components. Use a spray bottle to
liberally apply the solution to all surfaces of the removed
parts or soak the removed parts in the sanitizer/water
solution. Do not rinse parts after sanitizing.
Use half of the sanitizer/water solution to
Step 11
sanitize all foodzone surfaces of the ice machine and bin.
Use a spray bottle to liberally apply the solution. When
sanitizing, pay particular attention to the following areas:
• Evaporator plastic parts - including top, bottom and
sides
• Bin bottom, sides and top
Do not rinse the sanitized areas.
Replace all removed components.
Step 12
Wait 25 minutes.
Step 13
Reapply power and water to the ice machine
Step 14
and place the toggle switch in the ice position.
Water will flow through the water dump valve
Step 15
and down the drain. Wait until the water trough refills,
then add the proper amount of ice machine sanitizer to
the water trough.
KT0300 - KT0400 - KT0420 - KT0500
KT0700 - KT1000
Wait until the sanitize cycle is complete (approximately 24
minutes) then place the toggle switch in the ice position to
start ice making.
Part Number STH063 9/17
Water
3 gal. (12 l)
Model
KT1700
Mixed With
2 oz (60 ml) sanitizer
Amount of Sanitizer
3 ounces (90 ml)
6 ounces (180 ml)
39