Koolaire KDT0300A Technician's Handbook page 38

Mix a solution of cleaner and lukewarm water.
Step 6
Depending on the amount of mineral buildup, a larger
quantity of solution may be required. Use the ratio in the
table below to mix enough solution to thoroughly clean all
parts.
Solution Type
Cleaner
Use half of the cleaner/water solution to clean
Step 7
all components. The cleaner solution will foam when it
contacts lime scale and mineral deposits; once the foaming
stops use a soft bristle brush, sponge or cloth (not a wire
brush) to carefully clean the parts. Soak the parts for 5
minutes (15 – 20 minutes for heavily scaled parts). Rinse all
components with clean water.
While components are soaking, use half of the
Step 8
cleaner/water solution to clean all foodzone surfaces of
the ice machine and bin. Use a nylon brush or cloth to
thoroughly clean the following ice machine areas:
• Evaporator plastic parts – including top, bottom and
sides
• Bin bottom, sides and top
• Rinse all areas thoroughly with clean water.
38
Water
1 gal. (4 l)
Mixed with
16 oz (500 ml) cleaner
Part Number STH063 9/17