Toggle Switch Operation - Koolaire KDT0300A Technician's Handbook

TOGGLE SWITCH OPERATION

Moving the toggle switch to clean will start a Clean cycle.
• Setting the ice machine to stop after the clean cycle:
Place the toggle switch in the clean position. The ice
machine will stop after the clean cycle.
• Pausing the cleaning cycle: Move the toggle switch to
Off. Moving the toggle switch to clean will restart the
clean cycle.
• Setting the ice machine to start ice making after the
clean cycle: Place the toggle switch in the Ice position
more than 2 minutes into the clean cycle.
Place the toggle switch in the clean position
Step 1
after ice falls from the evaporator at the end of a Harvest
cycle. Or, place the toggle switch in the off position and
allow the ice to melt off the evaporator.
Never use anything to force ice from the evaporator.
Damage may result.
Remove all ice from the bin.
Step 2
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner or Sanitizer.
36
Caution
,
Warning
n
Part Number STH063 9/17