Placement; Supply Lines; Maintenance; Cartridge Replacement - Westinghouse QL065 Owner's Manual

Installation (continued)

PLACEMENT

Move the assembled unit to its final location. If required, level the unit by adjusting the four leveling legs. Ensure that no rocking
is exhibited .
SUPPLY LINES (NOT INCLUDED)
The supply lines, which connect the faucet to the household water system, are
not supplied with this unit . They need to be purchased separately . Follow the
supply line manufacturer's instructions for proper installation .

Maintenance

CARTRIDGE REPLACEMENT

If in the future the ceramic cartridge needs to be replaced:
1 . Turn off the water supply to the faucet .
2 . Remove the faucet lever by hand . Loosen the screw with the Allen
wrench provided and pull the handle body out . The top lever of the
cartridge will be exposed .
3 . Unscrew the cap and rings, making sure not to damage the threads .
4 . Pull the cartridge out of the faucet body and replace it with a new
35 mm ceramic cartridge .
5 . Replace the rings, then the cap . Then place the handle body on the
cartridge . Hand tighten the screw back into the handle body, then
tighten it with the Allen wrench . Do not over tighten . Tighten the
faucet lever back on .
6 . Slowly open the water feed to the faucet to test .
QL065
Cartridge
Faucet
body
10
Lever
Rings
Screw
Cap
Handle
body