Care And Cleaning; Utility Sink; Cabinet - Westinghouse QL292 Owner's Manual

Care and Cleaning

UTILITY SINK

Your sink is manufactured with the highest grade stainless steel and will provide you many years of enjoyment with the proper care .
Do
- After use, always rinse your sink with tap
water to dilute and remove deposits .
- Towel dry after use whenever possible
to prevent water spots . Should water
spots occur, clean with a mild solution of
vinegar and water followed by a thorough
rinse .
- Use liquid soap, a general household
cleaner, or a weak solution of vinegar and
water for regular cleaning .
- Only use plastic scouring pads
recommended for use in stainless steel
sinks, and only use them in the bowl of
the sink . Scrub in the direction of the
satin finish lines.

CABINET

To maintain the surface of your cabinet, follow these tips .
Do
- Remove dust and dry dirt with a soft,
damp cloth .
- Clean grease, oil, paint and ink stains with
isopropyl (rubbing) alcohol . Immediately
rinse with water after stain removal .
Do not
- Do not allow any food, detergent, soap or
grease to dry or sit for extended periods
of time on the surface of the sink .
- Never use abrasive cleaning products, as
they will dull and scratch the finish.
- Do not use scouting pads on the deck, as
they will dull the mirror finish.
- Never use steel wool pads, as they will
leave iron particles on the sink, which will
cause corrosion .
- Never leave steel or cast iron pans in your
sink for extended periods of time, as this
can cause corrosion .
Do not
- Do not allow your cabinet surface to
come into contact with products such as
acetone (nail polish remover), nail polish,
dry cleaning solution, lacquer thinners,
gasoline, pine oil, etc .
- Use caution when using sharp
instruments that may fall and scratch the
surface .
11
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance .
CONGLOMKB .COM