Clearance Distances; Warranty; Minimum Distances - Fenix Ecosun 300 U+ Installation And User Manual

MINIMUM DISTANCES*

Clearance distances

The distance between the bottom edge of the appliance and the floor mustn't be less than 50
mm; 150 mm is recommended. The clearance distance on the side (e.g. from furniture) must
be at least 100 mm, and 100 mm is the minimum in the upward direction (see Fig. ).

4. Warranty

This product is covered with a 24-month warranty since the date of purchase which applies to defects of material and processing. The
complete wording of the Warranty Guidelines is available at the supplier's office or at the websites www.fenixgroup.eu. The warranty does
not apply to defects caused by unprofessional intervention, negligence, incorrect use, transport and/or inconvenient storage of the panel.
The manufacturer is not responsible for any indirect damage caused by the use of this panel.
Product type:
Serial number (label on the panel rear side):_ _ _ — _ _ _ — _ _ _ — _ _ _ — _ _ _
Jaroslava Ježka 1338/18a, 790 01 Jeseník
tel.: +420 584 495 442, fax: +420 584 495 431
e-mail: fenix@fenixgroup.cz , http://www.fenixgroup.cz
* The installation height and distance between panels stated
here is recommended; other distances must be discussed with
the manufacturer.
Date:
Fenix s.r.o.
300W h = 2,5m
600W h = 2,5m
700W h ≥ 2,7m
850W h ≥ 3m
tel.: +420 584 495 304, fax: +420 584 495 303
e-mail: fenix@fenixgroup.cz , http://www.fenixgroup.cz
x = 0,6m
x = 0,6m
x = 1,2m
x ≥1,2m
Stamp, signature:
Fenix Trading s.r.o.
Slezská 2, 790 01 Jeseník