Avocent DSR DSR800 Installer/User Manual page 31

4. Choose Energy if your monitor is EnergyStar compliant; otherwise
select Screen.
CAUTION: Monitor damage can result from the use of Energy Mode with monitors not
compliant with EnergyStar.
5. (Optional) Click Test to activate the screen saver test, which lasts 10
seconds, then returns you to the Security dialog box.
6. Click OK.
NOTE: Activation of the screen saver mode logs the user out of a server; no server is selected.
The status flag displays Free.
To exit the screen saver mode:
Press any key or move your mouse. The Main dialog box appears.
To turn off the screen saver:
1. In the Security dialog box, clear Enable Screen Saver.
2. Click OK.
To immediately turn on the screen saver:
1. Press Print Screen, then press Pause.
2. This command only works when the user is connected to a server.
Assigning server names
Use the Names dialog box to identify servers by name rather than by port number.
To access the Names dialog box:
1. Press Print Screen. The Main dialog box will appear.
2. Click Setup-Names. The Names dialog box appears.
Figure 3.7: Names Dialog Box
Chapter 3: Local Port Operation
25