Rear Panel - YOKOGAWA GS820 User Manual

1.2

Rear Panel

765601/765611
Functional ground terminal
Shields the measurement cable at ground potential. → Section 3.5
765602/765612
1-2
I/O terminals for synchronized operation
Used to connect multiple GS820s and perform synchronized operation. → Section 10.3
USB port
Used to connect to a PC with a USB interface and control the GS820
with commands by way of the USB storage or USB-TMC function.
→ Sections 4.6 and 12.2
Ethernet port
Connects to a LAN. → Section 13.2
TRIGGER
IN OUT USB LINK ACT
IN/OUT
ETHERNET
SYNC 100BASE-TX
Cooling fan → Section 3.2
TRIGGER
IN OUT USB LINK ACT
IN/OUT
ETHERNET
SYNC
100BASE-TX
BNC I/O terminals
Receives or transmits trigger signals and sweep signals.
→ Section 10.1
GP-IB
( IEEE 488 )
START
IN/OUT
100-120/220-240 V AC~
250 VA MAX 50/60 Hz
GP-IB
( IEEE 488 )
START
IN/OUT
100-120/220-240 V AC~
250 VA MAX 50/60 Hz
GP-IB connector
Used when controlling the GS820
with commands via the GP-IB
interface. → Section 14.3
External I/O connector (15 pins)
Receives or transmits digital signals
or transmits comparison results.
→ Section 10.2
RS-232 connector (9 pins)
Used when controlling the GS820 with
commands via the RS-232C interface.
→ Section 15.2
Power connector
Connects to a power supply.
→ Section 3.3
External I/O connector (50 pins)
Receives or transmits 16-bit digital
I/O signals in addition to the signals
similar to those of the external I/O
connector (15 pins) and RS-232
connector (9 pins) of the
765601/765611.
→ Section 10.2
IM 765601-01E