Inspection; Adjustment - Triumph Bonneville Handbook

Inspection

2 1
3
T908033
1. Lever
2. Adjuster (lever end)
3. 2 - 3 mm
• Check that there is 2 - 3 mm of
clutch lever free play at the point
shown in the diagram above.
• If there is an incorrect amount of
free play, adjustments must be
made.
Maintenance and Adjustment

Adjustment

1
T908034
1. Adjuster (engine end)
Note:
• Knurled locknuts are fitted to
Thruxton and
including the
Edition, Bonneville 110
models
Bonneville SE
models have
adjuster.
• Loosen the knurled locknut at the
lever end of the clutch cable and
turn the adjuster sleeve until the
correct amount of clutch lever free
play is achieved.
• Tighten the knurled locknut at the
clutch lever assembly.
• If the correct adjustment setting
cannot be achieved using the lever
adjuster, use the adjuster at the
engine end of the cable.
• Loosen the adjuster locknut.
Bonneville T100
Steve McQueen™
th
Edition
only. Bonneville,
and Scrambler
a ratchet type
73