Chapter Ii. Operating The Scanner; Step 1. Turn On Your Scanner; Step 2. Place Film In The Holder - Plustek OpticFilm 135 User Manual

Chapter II. Operating the Scanner

Your scanner accepts 35mm slides and negatives. However, some software programs
have limitations as to the information they can handle. The capacity of the computer's
memory and free space on your hard drive can also limit the physical size of the film
that you scan.
Your scanner comes with the advanced and feature rich scanning application QuickScan
Plus. This stand alone program allows you to perform advanced scanning features.

Step 1. Turn on Your Scanner

Please make sure the scanner's USB and power cables are properly connected and that
the scanner is turned on. The Power Saving button LED will turn on to indicate that the
device is powered on.

Step 2. Place Film in the Holder

Please use the included mounted film holder and filmstrip holder to secure your slides
and film for scanning. Insert mounted film into slots with emulsion (non-glossy) side
down.
Open the film holder and place the filmstrip in the film holder with the emulsion (non-
glossy) side down, then close the film holder cover. Always align the film towards the
direction of insertion. The direction of insertion is indicated by an arrow.
13