Cisco cBR Hardware Installation Manual page 13

Converged broadband routers

Hide thumbs Also See for cBR:

Table of Contents

Installing the Supervisor in the Cisco cBR Chassis

Installing the Supervisor Card in the Cisco cBR Chassis

Figure 10: Closed and Secured Spring-Loaded Ejectors on the Supervisor Card

Step 7

Tighten the two captive screws using a 3/16" flat-blade torque screwdriver with a torque of 10-12 lb-in (1.12-1.36 Nm)

to secure the card.

Cisco Converged Broadband Routers Hardware Installation Guide

Table of Contents