Advertisement
SETUP INSTRUCTIONS (continued)
8.
Connect hose B (9) from the hose assembly to the hose A (8)
which was already installed in step 2. See Fig. 7. The auto cleaner
is now ready to use.
9
9.
Turn on the filter pump, and make sure water is flowing through the
auto cleaner. The auto cleaner is now moving and vacuuming the
pool floor. See Fig. 8.
IMPORTANT NOTE
If the auto cleaner starts to stir the debris, sediments on the
pool floor, you will require to clean or replace the filter
cartridge more frequently as the fine sediments are retained
by the cartridge.
S AVE THESE INSTRUCTIONS
(198IO) AUTO CLEANER ENGLISH SIZE: 4.875" X 7.25" PANTONE 295U 06/29/2016
8
English
198A
7
8
Page 8
Hide quick links:
Advertisement
Need help?
Do you have a question about the auto cleaner and is the answer not in the manual?