Table of Contents
Advertisement
GENERAL SAFETY RULES
POWER TOOL USE AND CARE
1. Avoid accidental start-ups. Make sure the power switch is in the OFF position before connecting the plug to a
power source or carrying the tool.
2. Check power tool for damaged parts. Check for misalignment of moving parts, jamming, breakage, improper
mounting, or any other conditions that may affect the tool's operation. Do not use the power tool if the switch does
not turn ON/OFF. Any part that is damaged should be properly repaired or replaced before use.
3. Do not force the tool to do a job for which it was not designed. Use the correct power tool and accessories and
follow the instructions for your application to prevent hazardous situations.
4. Remove adjustment tools. Always make sure all adjustment tools or wrenches are removed from the tool before
turning on the power tool.
5. Keep guards in place and in working order before operating the tool. All protection and safety devices must be
replaced after completing repair and maintenance procedures
6. Never leave a running tool unattended. Do not leave the tool until it has come to a complete stop.
7. Always remove the power cord plug from the electrical outlet when making adjustments, changing parts, or stor-
ing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
8. Maintain power tools properly. Safely store power tools out of the reach of children. Always keep tools clean and
in good working order. Follow instructions for lubricating and changing accessories.
9. When servicing, only use identical replacement parts and accessories. Use of any other part can cause damage
to the product
SPECIFIC RULES FOR THE MITER SAW
SAW BLADE SAFETY
1. Always wear protective gloves when handling saw blades.
2. Only use a saw blade suitable for both your miter saw and your workpiece. The maximum permissible speed of
your saw blade should be higher than the maximum rotational speed of the saw.
3. Never use damaged or deformed saw blades. Only use sharp blades.
PERSONAL SAFETY
1. Operate in a well ventilated area. Keep the floor area around the miter saw level and free of slippery substances
or other tripping hazards.
2. Do not wear loose clothing or jewelry (rings, watches, etc.) when operating the miter saw. Inappropriate clothing
and items can get caught in moving parts and draw you in. Always wear non-slip footwear and tie back long hair.
3. Wear ANSI-approved safety goggles to protect your eyes from sparks and saw dust and hearing protection to
protect yourself from hearing loss.
4
Advertisement
Table of Contents
