Storing Fm/Am Preset; Frequency - Kia AV2A0CSAN User Manual

PART 2 AUDIO SYSTEM
Selecting FM/AM broadcast frequency
There are 3 ways to select the broadcast fre-
quency - (a) selecting through preset, (b)
selecting through SEEK, (c) selecting through
manual search.
(a) Selecting a frequency through preset
Press the preset button of the desired broad-
cast frequency.
INFORMATION
∧ ∨
P ress the or keys on the steering
● 
wheel remote controller shortly. The preset
frequencies of the current band will be select-
ed in order.
T here are 6 preset frequencies each for FM1,
● 
FM2, and AM modes.
[Storing FM/AM preset], page 2-4.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Preset <1 to 6>"
"Preset Up"
"Preset Down"
2-4
AUDIO SYSTEM
(b) S e l e c t i n g a B r o a d c a s t f r e q u e n c y
through SEEK
Press the key on the control panel
or
or the buttons on FM1, FM2, and
AM mode screens for less than 0.8 second.
Once the SEEK function is operating (SEEK
indicator blinking), the next or previo us
broadcast frequency with superior reception
will be searched automatically.
INFORMATION
P ress the key on the control panel
● 
∧ ∨
or the or keys on the steering
wheel remote controller or the
buttons on FM1, FM2, and AM mode
screens for more than 0.8 second to quickly
move to the nearest desired frequency.
Once the button is released, the next fre-
quency with superior reception will be
searched automatically.
I f the SEEK function is operating, pressing
● 
the key on the control panel
again will terminate SEEK operation and
select the current frequency.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Seek Up"
"Seek Down"
(c) Selecting a broadcast frequency through
manual search
∨TUNE∧
Press the key to search for desired

frequency.

∨TUNE∧
Each click on the
buttons will increase or decrease the fre-
or
quency by 1 step (FM: 0.2 MHz, AM: 10 kHz).

Storing FM/AM preset

1. Select the desired frequency.
[Selecting FM/AM broadcast frequency],
page 2-4.
2. Press the preset button to store for over 0.8
second. The frequency will become stored
along with a beep sound.
or
key or the