Storing Sirius Preset; Scanning Sirius Broadcast Channel - Kia AV2A0CSAN User Manual

2. Select the desired channel button. The pre-
vious screen will be restored and the select-
ed channel will begin playing.
(e) Selecting channel by directly inputting
the channel number
1. Press the Search button. The channel input
screen will be displayed.
2. Input desired channel number, and press
the Done button.
The previous screen will be restored and the
selected channel will begin playing.
INFORMATION
To prevent inputting a channel which exceeds
the channel range, numbers which cannot be
inputted are set to disabled state.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Channel<0 to 223>"

Storing SIRIUS preset

1. Select the desired channel.
[Selecting SIRIUS broadcast channel],
page 2-7.
2. Press the preset button for over 0.8 second.
The frequency will be saved along with
beep sound.
INFORMATION
Six preset frequencies each for SIRIUS1/
SIRIUS2/SIRIUS3 modes can be stored using
the above instructions.

Scanning SIRIUS broadcast channel

1. Press the Scan button.
S CAN (under 0.8 second): scans all channels
● 
for 5 seconds each if in channel mode. If in
category mode, scans all channels within
the current category for 5 seconds each.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"Scan"
PRESET SCAN (over 0.8 second): scans the 6
●
preset channels within the current band for
5 seconds each.
AUDIO SYSTEM
2-9