Standalone Mode 2 Control - Epson S1V30080F00A300 User Manual

3. Usage Instructions

3.2.2 Standalone mode 2 control

The Cinderella standalone demo control push-switches (SW2 to SW5) are as shown in Table 3.8
for Standalone mode 2.
Table 3.8 Standalone 2 push-switch (SW2 to SW5) functions
Interface
Standalone 2
SW3 and SW4 are used to specify the file index number.
SW4 specifies the higher-order digit in hexadecimal, and SW3 specifies the lower-order digit. The
file index number is determined by the number of times SW3 and SW4 are pressed. For example,
to specify file index number 21 (0x15), press SW4 once and SW3 five times.
SW5 starts playback, and SW2 stops playback.
24
SW5 SW4
File index
START number
0x10 digit
EPSON
SW2 to 5
SW3
File index
number
0x01 digit
S1V30080 Series Evaluation Board User's Guide
SW2
STOP
(Rev. 1.00)