Code CR2 User Manual page 90

Scan the code below to inquire and connect to the desired device. It may take
7
20 - 30 seconds for the devices to connect. Observe the connection status
check-mark on the device ICON in the Bluetooth Connection Manager upper
screen and in the serial port connection at the bottom of the screen.
Note: For Beta units your device name will come up as undiscovered
Inquire and Connect
When the ICON appears in upper screen, right click on it and select
8
Properties. Save Password and do not prompt to authorize connections.
CR2 User's Manual Draft_022803_AS - 83