Adisa ADI CD 70 Technical Manual Of Installation, Use And Maintenance page 23

ADI CD boiler - Technical Manual
Press OK button and the value will blink. While the value is blinking, use the setting knob to set the correct date.
Confirm with OK button.
+ +
Move the setting knob and set the parameter 3 "Year".
Press OK button and the value will blink. While the value is blinking, use the setting knob to set the correct year.
Confirm with OK button.
+ +
Press ESC button to return to the main display, where the boiler temperature is shown.
Setting of boiler flow temperature – Setpoint
From initial display, press INFO Button for 3 seconds. It appears the different user levels.
+
Move the setting knob and set "Commissioning" level. Press OK button. You are now in the general menu.
+
Move the setting knob and set "Consumer circuit 1". Press OK button.
+
The first parameter, 1859 "Flow temp setp cons request" is the boiler flow temperature (setpoint).
Press OK button and the value will blink. While the value is blinking, use the setting knob to set the temperature.
Confirm with OK button.
+ +
Press ESC button to return to the main display, where the boiler temperature is shown.
Setting of Language
From initial display, press OK button and select "Operator section" with the setting knob. Press OK button and set
the parameter 20 "Language
+ +
Press OK button and the value will blink. While the value is blinking, use the setting knob to set the correct
language. Confirm with OK button.
+ +
"
.
23