Warranty; Troubleshooting - Dustcontrol DC 3800 H Turbo EX Original Instructions Manual

Warranty

The warranty period for this machine is two years
and covers manufacturing defects. The warranty is
valid provided that the machine is used in the pro-
per manner for which it was designed and that it is
serviced as required. Normal wear is not covered
by this warranty.

Troubleshooting

Problem
Motor will not start.
Motor stops immediately
after starting.
* The motor protection should never be changed as the factory setting protects against
)
overheating.
Servicing carried out by anyone other than Dust-
control or its authorised agent shall automatically
void the warranty. No other warranty, express or
implied, shall apply.
Fault
Power not connected.
Motor protection tripped. *
Motor protection tripped
Wrong fuse.
Motor protection tripped. *
DC 3800 H Turbo EX - 19
Solution
Connect power.
) Investigate why the motor
has overloaded and remedy.
Note that if the machine
has been operating with
too much throttle, the
motor protection may have
tripped to protect against
overheating. Wait 5 minutes.
Reset by fi rst turning to the
0 position and then to the
starting position.
Fit the correct fuse.
Investigate why the motor
)
has overloaded. Note that
if the machine has been
operating with too much
throttle, the motor protection
may have tripped to protect
against overheating. Wait
5 minutes. Reset by fi rst
turning to the 0 position and
then to the starting position.
Part No 94264