Factory Default Selection; Relays Logic (Al/Aux) - TECSYSTEM MM453 Instruction Manual

FACTORY DEFAULT SELECTION

Selecting FACTORY DEFAULT the factory settings of the control unit can be restored.
Attention, pressing (yes) all programmed data will be erased and replaced with the default ones.
STEP FUNCTION DESCRIPTION
Press the ▲ ▼ keys to select yes or no.
Press the ENTER key to confirm your choice.
1
Setting YES after selecting the default data, the control unit
resets and returns to the display on the screen
"Temperatures".
NOTES:
Press the F2 key to return to the PROGRAMMING MENU.
Press the F1 key to exit the programming mode and return to display mode temperatures.
FACTORY DEFAULT SETTINGS
The selection of the factory default includes:

All channels enable "ON".

SCAN mode setting.

For the storage of temperature alarms and configuration,
see example screen on the right.

RELAYS LOGIC (AL/AUX).

MM453 PROGRAMMING ALARMS
INDICATION OF OPTIONAL PROGRAM STEPS
AL1= 90°C - AL2 = 119°C
C H 1 2 O N P T 1 0 0 S E T
A L 0 O N A L 0
R e l A L > A L 1
M o d e 1 > A L 2
SWITCHING OVER THE PRESET AL1 and AL2 VALUES
C H 1 2 O N P T 1 0 0 S E T
A L 0 O N A L 0
R e l A L > A L 1
M o d e 2 > A L 2
SWITCHING BELOW THE PRESET AL1 VALUE
SWITCHING OVER THE PRESET AL2 VALUE
16
C 6 0 ° C
9 0 ° C
1 1 9 ° C
C 6 0 ° C
9 0 ° C
1 1 9 ° C
MM453 SERIES
DISPLAY PAGE
F A C T O R Y D E F A U L T
R e s e t d a t a ?
P r e s s E n t e r
ALARM AND CONFIGURATION
C H 1 2 O N
A L 0 O N
R e l A L
M o d e 1
STATUS ALARM L1 L2
90°C
90 ° C
→ n o
P T 1 0 0 S E T
A L 0 C 6 0 ° C
> A L 1 9 0 ° C
> A L 2 1 1 9 ° C
119°C
119 ° C