Fluke 362 User Manual page 7

362
Users Manual
•
Remove the test leads from the Meter before the battery door is opened.
•
Examine the test leads for damaged insulation or exposed metal. Check test lead
continuity. Replace damaged test leads before using the Meter.
•
Do not use the Meter if it operates incorrectly. Protection can be compromised.
When in doubt, have the Meter serviced.
•
Do not use the Meter around explosive gas, vapor or in damp or wet
environments.
•
Use only type AAA batteries, properly installed in the Meter case, to power the
Meter.
•
When batteries are changed, make sure the calibration seal in the battery
compartment is not damaged. If damaged, the Meter may not be safe to use.
Return the Meter to Fluke for replacement of the seal.
•
When measuring, keep fingers behind the Tactile Barrier. See "The Meter" .
4