Fluke AirCheck Getting Started Manual page 21

What You Can Learn About Your Wireless Network?
The Security results report whether all APs on the
SSID use the same security credentials along with a
rating of Pass, Warning, or Fail.
The Connection test attempts to connect to each
network configured in your profile. Connection
test results indicate whether you can connect to
networks at your location or not with a test
grade of Pass or Fail. Additional details about
the connection e.g., channel, IP address
received, connect rate is provided as a rating of
Pass, Warning, or Fail.
 What unauthorized or unknown access points
are connected to my Wi-Fi network?
Are they a security risk?
The Rogue Access Points test is an optional part
of AutoTest, it indicates whether unauthorized
or unknown access points are detected with a
rating of Pass, Warning, or Fail. Results
include a list of all rogue access points heard at
your location. Identification of rogue access
points requires configuration of an Access
Control List (ACL). ACL configuration is available
from the AutoTest screen by selecting Rogue
Access Points > ACL or Home> Access Points
> ACL.
15