Table of Contents
Advertisement
M
aintenance and care
cleaning clogs
low suction or poor pickup may be
due to a clog in the vacuum cleaner. if
you notice a change in the sound of the
motor, check for clogs.
1. Unplug the vacuum from electrical outlet.
2. Empty dirt container.
3. Check upper tank for build up or clogs.
4. If you notice a clog in the upper tank,
remove the inner cyclone (see section
"Cleaning the upper tank" on page 16).
5. Grasp the hose wand and separate it
from the hose wand base. Check for a
clog in the base, the wand or in the hose.
6. Remove the Twist 'n Snap hose from the
vacuum by turning to the left. Straighten the
hose and unclog with a long, narrow object
such as a broom handle.
7. If the clog persists, follow the instructions
for "Checking the rotating floor brush and
drive belt" on page 12 and inspect the air
passageway for obstructions.
14
w w w . b i s s e l l . c o m
2.
5.
8 0 0 . 2 3 7 . 7 6 9 1
Advertisement
Table of Contents
