GE JP3030*J series Technical Service Manual page 20

SEt - SETTING UP UI SERVICE REPLACEMENT CONTROLS
Service Replacement UI's must be set up with the appropriate model number code to function correctly.
1. After replacing the control, power up the unit.
2. Upon power up, the UI will display the letters SEt after a few seconds. (On the GE UI units, all the LED's
3. Using the Timer up "^" and down "v" keys, select the correct model number based on the table below.
4. Press and hold the Timer Select (or Time Start on models where this key is available) for 7 seconds to
store the model code in the control.
5. The control will restart and operate normally.
CHP9530xxxx
ZHU30Rxxxx
CHP9536xxxx
ZHU36Rxxxx
PP9030xxxx
ZEU30Rxxxx
PP9036xxxx
ZEU36Rxxxx
PHP9030xxxx
PHP9036xxxx
JP5030xxxx
JP5036xxxx
SEt appears on display.)
"Horseshoe" User Interface
Model # Code
AA1
AF1
AA2
AF2
AC1
AE1
AC2
AE2
"Slew" User Interface
Model # Code
C1
C2
A1
A2
Description
30" Induction Café Blue
30" Induction Mgm White
36" Induction Café Blue
36" Induction Mgm Blue
30" Radiant Mgm White&Red
36" Radiant Mgm White&Red
Description
30"
36"
30" Radiant GE
36" Radiant GE
– 20 –