Page 2
SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries.
Page 3
For information regarding the exclusive, limited warranties applicable to Microchip products, please see Microchip’s standard terms and conditions of sale, which are printed on our sales documentation and available at www.microchip.com. Signed for and on behalf of Microchip Technology Inc. at Chandler, Arizona, USA. 2017 Microchip Technology Inc.
Customer Support • Document Revision History DOCUMENT LAYOUT This document describes how to configure the EVB-LAN9252-SPI, such as the DIGIO and SPI, as well as various setup options, scanning, and programming. The manual layout is as follows: • Chapter 1. “Overview”...
EVB-LAN9252-SPI Quick Start Guide CONVENTIONS USED IN THIS GUIDE This manual uses the following documentation conventions: DOCUMENTATION CONVENTIONS Description Represents Examples Arial font: ® Italic characters Referenced books MPLAB IDE User’s Guide Emphasized text ...is the only compiler... Initial caps...
PICSTART Plus and PIC-kit 2 and 3. CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: • Distributor or Representative • Local Sales Office • Field Application Engineer (FAE) • Technical Support 2017 Microchip Technology Inc. DS50002604A-page 9...
EVB-LAN9252-SPI Quick Start Guide Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document.
Chapter 1. Overview INTRODUCTION The EVB-LAN9252-SPI board is intended to be a generic interface to many third party processors used in EtherCAT Slave applications. The EVB-LAN9252-SPI is designed to be a simple interface to the SPI port, with test points for power and ground. The eval-...
QUICK START GUIDE Chapter 2. EVB-LAN9252-SPI EVB-LAN9252-SPI BOARD DESIGN This section is an overview of the EVB-LAN9252-SPI board design and interface. The board is intended to provide an interface to the SPI port of a microcontroller develop- ment platform. FIGURE 2-1: EVB-LAN9252-SPI TOP VIEW 2.1.1...
2.1.3 Digital Interface Connector EVB-LAN9252-SPI also has a mass interface connector on the bottom of the board. This interface is used to connect many of the LAN9252 signals to third party develop- ment platforms. These pins enable evaluation of HBI and SPI abstraction using LAN9252.
LAN9252 can be connected to an EtherCAT Master. Use the ESI files and EEPROM configuration settings to properly set up the LAN9252 for the desired digital communication. Debug and test the Slave code in the full EtherCAT development envi- ronment. 2017 Microchip Technology Inc. DS50002604A-page 15...
Need help?
Do you have a question about the EVB-LAN9252-SPI and is the answer not in the manual?
Questions and answers