1 PC Connection
When this option is used connect the Diary unit to a PC
running the software supplied to a USB port using the
cable supplied. The Diary is then controlled by the PC in
order to upload saved data or to reprogram the unit.
2 Message Log
The feature is not used in the Diary system.
3 Training Blow
Use this option to allow the user to familiarise themselves
with performing a spirometry test.
None of the tests
performed in this mode of operation will be stored.
4 Serial Number
Use this option to identify the serial number of the unit.
5 Unit ID
Use this option to display the programmed Unit ID and the
Full ID.
These identifiers, loaded into the Diary at the
time of programming.
6 Record Count
A record count and the percentage of memory used is
available with this option.
19