iBall Baton iB-WVG300N User Manual page 60

In this page, enter the MAC address of the LAN host and the static IP address that
is reserved for the host, and then click the Apply/Save button to apply the settings.
Configuring the Second IP Address and Subnet Mask for a LAN
Interface
In the Local Area Network (LAN) Setup page, you are allowed to set the second IP
address and the subnet mask for a LAN interface.
After enabling Configure the second IP Address and Subnet Mask for LAN
interface, enter an IP address and a subnet mask for the LAN interface.
After finishing setting, click the Apply/Save button to apply the settings.
6.2.4.1 IPv6 Auto-configuration
Click Network Setting > LAN >IPv6 Autoconfig, and the following page appears.
52
VDSL2 Gateway Router