VTech VC7151 User Manual page 35

Before you mount the sensor, follow the instructions below to check
the signal strength between the sensor and the telephone base.
Make sure you mount the sensor in a location where the signal
strength is good.
1. Press on the handset when idle.
2. Scroll to , and then press
.
3. Scroll to
.
4. Scroll to the sensor you want to test,
and then press
5. The screen displays
Press .
6. The screen displays
. Trigger your sensor (refer to
to trigger your sensor), and then press
• If the screen displays
, and then return to step 3 to test again.
• If the screen displays
, adjust the sensor's location to improve the signal.
7. When the screen displays
. Press . The testing is complete.
, and then press
.
.
31
.
. Press