VTech VC7151 User Manual page 32

You can add, edit, or delete a telephone number for remote calls.
1. Press on the handset or
telephone base when idle.
2. Scroll to choose
press .
3. Scroll to select
.
4. Scroll to the desired slots ( , , or ),
and then press
5. Use the dialing keys to enter the number.
6. Press to save.
You can choose to set the exit or entrance
delay time for the remote calls, so that
when the sensor is triggered upon you
exit or enter your home within the delay
time, you will not receive the unnecessary
remote call.
For example, if you are about to leave
home, you can set the exit delay time to
. Once the delay is set, you will
not receive any remote call even when
you open the door within the following five
minutes.
As for the entrance delay time, if you set it to
receive any remote call unless the door is opened for more than one
minute. If you want to be notified immediately whenever a door is
opened, we recommend you to set it as
NOTES
• When a delay time has been set, there will not be any local or remote call
alerts when a monitored garage door, in-house door, window, or medicine
cabinet is open during the delay time.
, and then
.
.
28
, you will not