Instrument Cluster Displays - RAM TRUCK 2500 2017 Owner's Manual Supplement

Using a driver interactive display located on the instru-
ment panel, your instrument cluster display can show you
how systems are working and give you warnings when
they aren't. The steering wheel mounted controls allow
you to scroll through and enter the main menus and
submenus. You can access the specific information you
want and make selections and adjustments.

Instrument Cluster Displays

The main display area will normally display the main
menu or the screens of a selected feature of the main menu.
The main display area also displays "pop up" messages
that consist of approximately 60 possible warning or
information messages. These pop up messages fall into
several categories:
• Five Second Stored Messages
When the appropriate conditions occur, this type of mes-
sage takes control of the main display area for five seconds
and then returns to the previous screen. Most of the
messages of this type are then stored (as long as the
condition that activated it remains active) and can be
reviewed from the "Messages" main menu item. As long as
there is a stored message, an "i" will be displayed in the
UNDERSTANDING YOUR INSTRUMENT PANEL 13
instrument cluster display's compass/outside temp line.
Examples of this message type are "Right Front Turn Signal
Lamp Out" and "Low Tire Pressure."
• Unstored Messages
This message type is displayed indefinitely or until the
condition that activated the message is cleared. Examples
of this message type are "Turn Signal On" (if a turn signal
is left on) and "Lights On" (if driver leaves the vehicle).
• Unstored Messages Until RUN
These messages deal primarily with the Remote Start
feature. This message type is displayed until the ignition is
in the RUN state. Examples of this message type are
"Remote Start Aborted - Door Ajar" and "Press Brake
Pedal and Push Button to Start."
• Five Second Unstored Messages
When the appropriate conditions occur, this type of mes-
sage takes control of the main display area for five seconds
and then returns to the previous screen. An example of this
message type is "Automatic High Beams On."
3