Related Manuals for LAZBOY 48951-A
Summary of Contents for LAZBOY 48951-A
- Page 1 Big & Tall Chair Assembly Instructions Model 48951-A / 48951-B 400 lbs LA-Z-BOY is a trademark of La-Z-Boy Incorporated and is used under license to LF Products Pte Ltd.
- Page 2 PARTS Casters Star Base Gas Lift with Telescoping Cover Seat Plate Quantity: 5 Quantity:1 Quantity: 1 Quantity: 1 Back Cushion Plastic Shroud Arms Seat Cushion Quantity: 1 Quantity: 1 Quantity: 2 Quantity:1 1” Screws 2-1/4” Screws 1-1/4” Screws 2-3/4” Screws with Spring Washers Quantity: 2 Quantity: 2 Quantity: 4...
- Page 3 Step 1 Place the star base (B) upside down and insert 5 casters (A) into the holes on the star base (B). Step 2 Turn the star base (B) over and insert the gas lift with telescoping cover (C) through the center hole on top of star base (B).
- Page 4 Step 3 Attach seat plate (D) to the bottom of the seat cushion (F) (with the front of the seat plate facing the front of seat cushion). Attach by using two 2-1/4” screws (J) for the front holes of the seat plate (D) and two 1”...
- Page 5 Step 5 Position the back support plate over the seat plate (D), and attach the back cushion(G) to the seat cushion (F) with four 1-1/4" screws (K). *Note: Do NOT tighten the screws completely. Step 6 Insert four 2-3/4" screws with spring washers (L) into arm holes attaching arms (E) (with front of arms facing the front of seat cushion) to sides of seat cushion (F) and back cushion (G).
- Page 6 Step 7 Put the plastic shroud (H) over the seat plate (D) (with front of plastic shroud facing the front of seat cushion). Align shroud posts to holes on bottom of seat cushion (F) and press into position. Step 8 Position the assembled chair upright with the seat plate facing down.
- Page 7 Step 9 Press the plastic caps (M) into the holes on outside of the arms once all screws have been tightened.
-
Page 8: Operating Instructions
Operating Instructions Function Instruction - 1 To Adjust Seat Height: While seated, lean forward and reach under the right side of the chair to find the lever. Lift the lever and raise your body up slightly to allow the chair to rise to the desired height. Once desired height is reached, release lever to lock chair at desired height. - Page 9 Function Instruction - 2 To Operate Tilt Lockout: While seated, reach under the left side of the chair to find lever. Push down the lever and lean back to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and pull the lever to the up position.
- Page 10 Function Instruction - 3 To Adjust Tension On The Tilt: Reach under the front center of the chair, grasp the round knob (R) and turn it counter- clockwise to stiffen the tilt mechanism for a heavier user. Turn the knob (R) clockwise to loosen the tilt mechanism for a lighter user.
- Page 11 Function Instruction - 4 360˚ SWIVEL 360˚ Seat swivel.