Engine Oil - Hyundai Genesis Cupe 2016 Owner's Manual

Table of Contents

Advertisement

ENGINE OIL

Checking the engine oil level
1. Be sure the vehicle is on level
ground.
2. Start the engine and allow it to
reach normal operating tempera-
ture.
3. Turn the engine off and wait for a
few minutes (about 5 minutes) for
the oil to return to the oil pan.
4. Pull the dipstick out, wipe it clean,
and re-insert it fully.
WARNING -
Be very careful not to touch the
radiator hose when checking or
adding the engine oil as it may
be hot enough to burn you.
5. Pull the dipstick out again and
check the level. The level should
be between F and L.
OBK079035
CAUTION
• Do not overfill with engine oil.
Engine damage may result.
• Do not spill engine oil, when
adding or changing engine oil.
If you drop the engine oil on
the engine room, wipe it off
immediately.
Radiator
hose
If it is near or at L, add enough oil to
bring the level to F. Do not overfill.
Use a funnel to help prevent oil
from being spilled on engine com-
ponents.
Use only the specified engine oil.
(Refer to "Recommended lubricants
and capacities" in section 8.)
Maintenance
OBK079036
7 23

Advertisement

Table of Contents
loading

Table of Contents