Hyundai Genesis Cupe 2016 Owner's Manual page 122

WARNING
Before programming HomeLink
to a garage door opener or gate
operator, make sure that people
and objects are out of the way of
the device to prevent potential
harm or damage. Do not use
®
HomeLink with any garage door
opener that lacks the safety stop
and reverse features required by
U.S. federal safety standards (this
includes any garage door opener
model manufactured before April
1, 1982). A garage door that can-
not detect an object - signaling
the door to stop and reverse -
does not meet current U.S. feder-
al safety standards. Using a
garage door opener without these
features increases the risk of seri-
ous injury or death.
Retain the original transmitter of the
RF device you are programming for
® use in other vehicles as well as for
®
future HomeLink programming. It is
also suggested that upon the sale of
the vehicle, the
®
HomeLink buttons be erased for
security purposes.
Features of your vehicle
✽ ✽ NOTICE -
• When programming a garage
door opener, it is advised to park
the vehicle outside of the garage.
programmed
• It is recommended that a new bat-
tery be placed in the hand-held
transmitter of the device being pro-
grammed to HomeLink
er training and accurate transmis-
sion of the radio-frequency signal.
• Some vehicles may require the
ignition switch to be turned to the
second (or "accessories") position
for programming and/or opera-
tion of HomeLink
• In the event that there are still pro-
gramming difficulties or questions
after following the programming
steps
HomeLink
or 1-800-355-3515.
Programming
®
HomeLink
®
for quick-
®
.
listed below, contact
®
at: www.homelink.com
4 39