Removal/Reinstall
To remove the headrest:
1. Recline the seatback (2) with the
recline lever or switch (1).
2. Raise headrest as far as it can go.
3. Press the headrest release button
(3) while pulling the headrest up
(4).
WARNING
NEVER allow anyone to ride in a
seat with the headrest removed.
OBK033069
To reinstall the headrest :
1. Put the headrest poles (2) into the
holes while pressing the release
button (1).
2. Recline the seatback (4) with the
recline lever or switch (3).
3. Adjust the headrest to the appro-
priate height.
WARNING
Always make sure the headrest
locks into position after rein-
stalling and adjusting it properly.
Safety features of your vehicle
OBK033070
Active headrest (if equipped)
The active headrest is designed to
move forward and upward during a
rear impact. This helps prevent the
driver's and front passenger's heads
from moving backward and thus
helps minimize neck injuries.
HNF2041-1
3 9