Replacing Battery - iDevices IDEV0020 Installation And Setup Manual

B AT T E RY

REPLACING BATTERY

• The iDevices Instant Switch uses a standard CR2032 battery ONLY,
and lasts up to 2 years.
• Access the battery by pressing the module assembly in where noted
and tilting the top toward you to remove from the mounting plate.
• After the module assembly has been removed, the battery will be
visible on the back.
• Remove the battery by inserting your finger into the notch and
pulling it toward you.
• When replacing the battery, be sure to install with the positive side
(+) facing out, so it is visible.
24