iDevices IDEV0020 Installation And Setup Manual page 14

I N S TA L L AT I O N
1
INSTALL ON A WALL
• To mount your Instant Switch directly onto a wall, first thoroughly
clean the wall's surface with isopropyl alcohol to remove any dirt or dust.
• Remove the plastic backing to the Command™ Strip and align the
strip with the recessed area on the back of the Instant Switch.
• Peel off the other side of the plastic backing and ensure that the
product is level before pressing firmly to the wall. Hold for
30 seconds.
• Install the magnetic iDevices faceplate, or a rocker style faceplate
of your choice. If the faceplate you choose requires screws, use the
shorter, 6mm screws provided to anchor the faceplate to the
Instant Switch.
14