iDevices IDEV0020 Installation And Setup Manual page 22

INSTALL INTO GANG BOX (CONT.)
3
• If you choose this method of installation, do not use the 3M
Command™ Strip on the back of the product. Instead, use the
longer, 22mm screws provided to mount it onto the gang box.
• Install a rocker switch faceplate (not included) using the shorter,
6mm screws provided to anchor the faceplate to the Instant Switch.
• Turn the power back ON at your circuit breaker.
NOTE:
It is not intended to use the iDevices faceplate when mounting the iDevices Instant
Switch in a gang box. Instead, use a standard rocker faceplate of your choice (not included).
22