Vehicle Immersion - Bennche Bighorn 400 Owner's Manual

Vehicle Immersion

CAUTION:
If your vehicle becomes immersed, major
engine damage can result if the machine is
not thoroughly inspected. Take the vehicle to
your service center before starting the
engine.
If it is impossible to take your vehicle to a
service center before starting it, follow the
steps outlined below.
1. Move the vehicle to dry land.
2. Check the air box. If water is present, dry
the air box and replace the filter with a
new filter.
3. Remove the spark plugs.
4. Turn the engine over several times.
5. Dry the spark plugs and reinstall them, or
install new plugs.
6. Attempt to start the engine. If necessary,
repeat the drying procedure.
7. Take the vehicle to your service center
for service as soon as possible, whether
you succeed in starting it or not.
8. If water has been ingested into the CVT,
make sure to inspect the hole without
water left inside. If it is muddy water,
open the CVT cap and wash the parts
before you reassemble.
9. Check the gearshift and release the
water inside. Wash it if it is necessary.
Your Vehicle 7-14